EL-50448 TPMS Reset Tool is special for GM Series vehicle.This article is the EL-50448 instructions on how to use EL50448 reset Chevry Cruze tire pressure monitor sensors.
Tools you need:
EL-50448 GM TPMS reset tool.
First,you need to get in car TPMS learn mode.
1.Set parking brake.
2. Turn ignition to ON/RUN (engine off)
3. Use the MENU button to select the VEHICLE INFORMATION menu in the DRIVER INFORMATION CENTER (DIC).
4. Use thumbwheel to scroll to the Tire Pressure menu item screen.
5. Press the SET/CLR button to begin sensor matching process. A message requesting acceptance of the process should display.
6. Press the SET/CLR button again to confirm selection.
Second,use el50448 to close each valve stem.
Note: Beginning with the left front tire, Once the sensor has been activated, the horn will chirp and the right front turn signal will be illuminated. You can then turn the vehicle off to exit “learn mode.”
(Starting with Left Front tire -> Right Front -> Right Rear -> Left Rear)
Article form:https://uobdii.quora.com/EL50448-relearn-Chevry-Cruze-TPMS
留言列表
